-
This is default featured slide 1 title
Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.
-
This is default featured slide 2 title
Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.
-
This is default featured slide 3 title
Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.
-
This is default featured slide 4 title
Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.
-
This is default featured slide 5 title
Go to Blogger edit html and find these sentences.Now replace these sentences with your own descriptions.This theme is Bloggerized by Lasantha Bandara - Premiumbloggertemplates.com.
কি ভাবে SuperCopier দিয়ে ৪ গুন বেসি speed এ কপি করবেন
দেখে নিন এক নজরে অ্যাডোব ফটোশপ সি সি -২০১৫ এর পাঁচটি অসাধারণ নতুন ফিচার ( ভিডিও টিউটোরিয়াল )
তো যাইহোক, অনেক কথা বললাম।
যে ১০টি আকর্ষণীয় সুবিধা উইন্ডোজ ১০ ছাড়া অন্য কোথাও পাবেন না
২। স্ন্যাপ উইন্ডো (সাইড বাই সাইড)
ব্রাউজারে যেমন বিভিন্ন ট্যাব খুলে বিভিন্ন কাজ করেন, তেমন ইউন্ডোজ ১০ এও সাইড বাই সাইড ডেস্কটপে বিভিন্ন কাজ করতে পারবেন। থাকছে ইচ্চামত কাস্টমাইজ করার সুবিধাও।
৩। স্টোরেজ স্পেস অ্যানালাইসিস
৪। মাল্টিপল ভার্চুয়াল ডেস্কটপ
৫। নটিফিকেশন বার
৬। ডেডিকেটেড টু ট্যাবলেট মোড
৭। মাইক্রোসফট এড্জ ব্রাউজার
৯। উইন্ডোজে IOS এবং অ্যানড্রয়েড
১০। আল্ট্রা মডার্ন স্টার্ট মেনু
এছাড়াও আরো এত্তোগুলা সুবিধা আছে যা লিখতে লাগলে আমার কীবোর্ড এর ১২ টা বেজে যাবে। মোট কথা হল উইন্ডোজ ১০ যে একবার ব্যবহার করবেন সে আর জীবনেও অতীতের কোন ভার্শনে ফিরে যেতে চাইবেন না।
এবার IDM 6.23 Build 17 কে Life টাইম করে নিতে এখানে দেখুন
তারপর এখন যে ফাইলটি ডাওনলোড করলেন সেখান থেকে idman623build17.exe টি Install করুন।এবার Crack ফোল্ডার থেকে IDMan.exe ফাইলটি কপি করে আপনার PC এর C Drive-> Program Files (x86)-> Internet Download Manager এ Replace করে ফেলুন।এবার পুনরায় ডাওনলোড করা ফোল্ডার থেকে RegMe.reg ফাইলটি রান করুন।ব্যাস কাজ সেশ।এবার আপনার PC Restart করুন।আর সারাজিবন ব্যবহার করতে থাকুন।তবে কেও যদি পুনরায় আপডেট করেন তাহলে আপডেট করার পর Crack ফোল্ডার থেকে IDMan.exe ফাইলটি কপি করে আপনার PC এর C Drive-> Program Files (x86)-> Internet Download Manager এ Replace করে ফেলুন।এবার ডাওনলোড করা ফোল্ডার থেকে RegMe.reg ফাইলটি রান করুন। তারপর আরামে ব্যবহার করুন সারাজিবনের জন্য।
তাই, Mozila দিয়ে IDM এর সাহা্য্যে Youtube ভিডিও ডাওনলোড করতে Mozila Filefox-> Add-ons-> Extentions -> IDM 6.23.17 এটি Enable করে Mozila Restart করুন।
আর Google Chorme ব্যবহার কারিরা Google Chorme -> Setting-> Extentions -> IDM 6.23.17 এটি Enable করে Chorme Restart করুন।
আর আরামে চালাতে থাকুন।
উইন্ডোজ ১০ এর Official Home & Pro ISO (x64) ডাউনলোড করে নিন (Google Drive Direct Download Link…)
Active your Windows 10 Now (1 Click and you are done) HOT
Download Here
ফাইলের ভেতরে দেয়া Read Me ফাইল টি অনুসরন করুন
কি করে বন্ধ করবেন উইণ্ডোস ১০ অটো আপডেট মাত্র ছয় ধাপে
তাই আপনি জানতেও পারবেন না যে আপনার লিমিটেড নেট কখন শেষ হয়ে যাবে, এই WINDOWS আপডেটর জন্য
তাই DISABLE করে দেখালাম কি করে Disable করবেন অটো আপডেট.
View Local Services এ windows update সিলেক্ট করবেন ঠিক করে না হলে উইন্ডোস আপডেটর জায়গাতে অন্য কোনো সার্ভিস বন্ধ হয়ে যাবে।
অনুগ্রহ করে আমাকে ক্ষমা করবেন আমি যদি কোনো ভুল করি...
সবার জন্য শুভকামনা আর গঠনমূলক টিউমেন্ট, পরামর্শ অথবা সমালোচনা প্রত্যাশা করি ...
কিভাবে উইন্ডোজ ১০ এর আইকন উইন্ডোজ ৭, ৮, ৮.১ এ ব্যবহার করবেন।
আর কথা বারাইলাম না। কাজের কথায় চলে যাই।
উইন্ডোজ ১০ সম্পর্কে অনেকেই জানেন এবং ব্যবহারও করেছেন। তাই উইন্ডোজ ১০ সম্পর্কে বাড়তি কিছু বলার নাই। উইন্ডোজ ১০ এর
আইকন সবাই ভালোবাসেন বা ভালো লাগে। তাই আমি আজ দেখাবো কি করে উইন্ডোজ ১০ এর আইকন, উইন্ডোজ ৭, ৮, ৮.১ এ ব্যবহার
করতে হয়। লেখা জন্যে পর্যাপ্ত সময় না থাকায় আমি টিউটোরিয়াল করে দেথালাম, আশা করি আপনি সহজেই বুঝতে পারবেন।
কিভাবে উইন্ডোজ ১০ এর আইকন, উইন্ডোজ ৭, ৮, ৮.১ এ ব্যবহার করবেন।
টিউটোরিয়ালটি ইউটিউব দেথে নিন। এই লিঙ্ক
https://www.youtube.com/watch?v=HRiDJDOYn44
টিউটোরিয়ালটির Screenshots দেখে নিন।
My DisplayLink device does not work at all, or I get the message "USB device not recognized", when connecting on Windows.
Note: Unless a DisplayLink product is identified by the DisplayLink software on the USB bus, the DisplayLink UI icon will not appear in the Windows system tray.
If you do not see the DisplayLink UI in the system tray, check that the device is recognised on the USB bus.
If you have a product based on the DL-3xxx or DL-5xxx (USB 3.0) family, the DisplayLink UI will only appear if a DisplayLink device has been detected AND a monitor is connected to the video output. The DL-3000 family implements monitor detection and the DisplayLink UI will only be shown in the system tray when a DisplayLink device and a display is detected.
"USB Device Not Recognized" message
This is normally due to a hardware problem. The Windows PC has tried to query the USB device to find out what it is and a device has returned a corrupt message.
This is not due to a DisplayLink software or driver problem, as the OS has not even been able to recognise the device to know which driver it requires.
To solve this, try the following steps:
- Check other USB devices are recognised by the PC. Ensure that you are using a good quality USB cable and test again by using a different USB port on the computer.
- If using a USB bus powered device, make sure that the device is connected to an externally powered USB hub (the hub has a USB cable AND a power supply connected to it). This will ensure that the device is receiving enough power from the USB bus.
- If using a docking station, remove all other devices that may be connected to the dock and try again. This will confirm that it is not caused by another device connected to the dock.
Check the device is recognised on the USB bus
If your device does not work, the first thing to check is that the DisplayLink device has been detected by Windows. This can be done by checking that the DisplayLink device appears in Windows device manager.
To open device manager, follow the steps below:
- Click on the Windows Start button
- In the search box, or on Windows 8 onwards, just type
devmgmt.msc
. - Press return and the device manager window will appear
If no devices are shown, then follow the steps below to try and make the device appear in device manager.
- Check the DisplayLink device does not appear under "Other devices". If there is an item under "Other Devices",follow the steps below to see if it is the DisplayLink device.
- Unplug all cables from the device, then reconnect power (if needed) then the USB cable.
- Check the USB port with another device to make sure other devices are recognised.
- If using a Wireless USB product, ensure the wireless USB drivers are installed separately. The wireless USB link is not part of the DisplayLink technology and will need separate drivers to be installed.
- Check that the USB cable works with other devices.
- If using a USB bus powered device, make sure that the device is connected to an externally powered USB hub (the hub has a USB cable and a power supply connected to it). This will ensure that the device an receive enough power from the USB bus.
- Try the adapter on another computer.
If a device is shown, check the Product ID to ensure it has started up correctly.
Checking "Other Devices"
To check if the DisplayLink device has been detected as an "Other Device":
- Right click on the device and choose "Properties"
- Click on the "Details" tab
- Choose the Property "Hardware Ids".
- If the device is a DisplayLink device, you should see a value like USB\VID_17E9&PID_XXXX, where XXXX can be any hexadecimcal value (0-9 or A-F). If the VID is not 17E9, then this is not a DisplayLink device. Eg:
Check the Product ID of the DisplayLink device
If the DisplayLink device is shown in device manager, but still does not work, then the Product ID (PID) should be checked to make sure the device has started up correctly.
- Right click on the device and choose "Properties"
- Click on the "Details" tab
- Choose the Property "Hardware Ids".
- If the device is a DisplayLink device, you should see a value like USB\VID_17E9&PID_XXXX, where XXXX can be any hexadecimcal value (0-9 or A-F).
If the PID is
8060
or 8080
, then the device has not booted up correctly. To recover the device:- Unplug all cables
- Connect Power (if required)
- Connect the USB cable
- Connect the video cable
USB device is not recognized when you attach it immediately after your Windows XP-based computer resumes from standby or hibernation
Symptoms
Cause
- Host controller hardware
- Attached hubs
- Attached devices
- USB driver versions
- Support for USB 2.0
- Additional system hardware or configurations that may change the timing
Resolution
Workaround
Method 1: Initiate recognition of the USB device by using Device Manager
To initiate recognition of the USB device by using Device Manager, follow these steps:- Click Start, click Run, type Devmgmt.msc, and then click OK. The Device Manager window opens.
- Click to select your computer as the location for the scan.
- On the Action menu, click Scan for hardware changes.
Windows XP recognizes the new device. - Close the Device Manager window.
If this method does not resolve the issue, go to method 2.
Method 2: Disable power management of the USB hub
Note If you perform the following procedure, you may also reduce the battery life on a portable computer.Use this method if method 1 does not work. To disable power management of the USB hub, follow these steps:
- Click Start, click Run, type Devmgmt.msc, and then click OK. The Device Manager window opens.
- Expand Universal Serial Bus controllers.
- Right-click a USB Root Hub in the list, and then click Properties. The USB Root Hub Properties dialog box is displayed.
- Click the Power Management tab.
- Click to clear the Allow the computer to turn off this device to save power check box, and then click OK.
- Repeat steps 3 through 6 for each USB Root Hub in the list.
- On the Action menu, click Scan for hardware changes.
Windows XP recognizes the new device. - Close the Device Manager window.
Method 3: Restart the computer
To initiate recognition of the USB device, first unplug the USB device and restart the computer. Then, wait five to ten seconds before you plug the USB device into the computer or hub. Windows XP recognizes the new device.If this method does not resolve the issue, you might want to review the articles in the "Similar Problems and Solutions" section, or contact Support. For information about how to contact Support, visit the following Microsoft Web site:
ডাউনলোড উইন্ডোজ ১০ বিনামূল্যে আপগ্রেড ইনস্টল
উইন্ডোজ ১০
চালু করুন উইন্ডোজ ১০ আপগ্রেড.
এ ছাড়া সকল Windows আপডেট গুলি ডাউনলোড করে নেবেন, Windows ১০- র মেন আপডেট ফাইল টি হলো "KB3012973" যদি কোনো প্রবলেম হয় তা হলে অবশ্যই বলবেন। নিজে করে দেখুন ভালো লাগবে। আমি নিজে WINDOWS 8 তে করে দেখালাম --এরপর যদি উইন্ডোস ১০ ডাউনলোড সুরু না হয় তবে আপনি আপনার ইন্টারনেট এর স্পিড তা একবার চেক করে দেখতে পারেন। যদি ইন্টারনেট এর স্পিড স্লো হয় তবে রাতে ডাউনলোড দিবেন ডাউনলোড হওয়ার পরে, ইনস্টল হতে ২২ মিনিট সময় লাগে. যদি কোনো প্রবলেম হয় তা হলে অবশ্যই বলবেন।